A4 V6-3.0L (AVK) (2004)
-
Observe safety precautions after connecting the battery.
2
-
Eyelets on belt end, outer attachment point for seat
3
-
Belt tensioner
4
-
Bolt
-
Tightening torque: 55 Nm
5
-
Guide
6
-
Seat belt height adjuster
-
Removal of seat belt height adjuster
-
Remove upper B-pillar trim panel -5-
-
Remove bolts -7- and -8-.
-
Pull belt height adjuster -6- up and remove.
-
Installation of seat belt height adjuster.
NOTE:
-
Do not press switch -10- when installing.
-
Function check after installing trim:
-
Height adjuster must audibly engage into all five possible positions (even top position).
-
Button must return by itself to upper position after being actuated.
7
-
Bolt
-
Tightening torque: 55 Nm
-
Guide stop must level off without assistance in wearer's direction after tightening the bolt.
8
-
Bolt
-
Tightening torque: 23 Nm
9
-
Connector
10
-
Switch for height adjustment