A4 V6-3.0L (AVK) (2004)
-
Do not kink
-
Clip onto fuel tank
6
-
Seal
-
When installing, fit seal (dry) in fuel tank opening
7
-
Locking ring
-
Remove and install using wrench 3087
-
Tighten to 145 Nm
8
-
Electrical connector
-
For Fuel Level Sensor 2 -G169-
-
Releasing, see Fig. 1
9
-
Flange
-
Only available together with -Item 10-.
-
Installation position
10
-
Fuel Level Sensor 2 -G169-
-
Only available together with -Item 9-.
11
-
Suction jet pump
-
With lines
-
Secured on flange
12
-
Fuel supply line
-
From right suction jet pump
Fig. 1 Releasing connector
-
To disconnect multi-pin connector at fuel delivery unit, first release retaining catch. This can be done manually or by using a small screwdriver
-arrow-.