A4 V6-3.0L (AVK) (2004)
Camshaft Position Sensor: Testing and Inspection
With Generic Scan Tool
Check Camshaft Position (CMP) Sensor
Recommended special tools and equipment
-
VAG1526A multimeter
-
V.A.G 1527 B Voltage Tester
-
VAG1594A connector test kit
-
VAG1598/31 test box
NOTE: To reach the harness connectors at cylinder bank 2 (left), the left cover in engine compartment must be removed, the line to Engine Coolant
Level (ECL) Warning Switch at bottom on reservoir must be disconnected, and the bolt -arrow- of the coolant reservoir must be unscrewed and set aside.
Coolant hoses -1- to -3- remain connected.
Test requirement:
-
Ignition switched off.