A4 V6-3.0L (AVK) (2004)
Impact Sensor: Locations
Front Airbag Crash Sensor, Assembly Overview
Front Airbag Crash Sensor, Assembly Overview
WARNING: Observe safety precautions for working on airbags.
1
-
Crash sensor, Driver's Front airbag -G283-and Passenger's Front airbag -G284-
See Cautions before beginning repairs on electrical system
-
Removal
-
Disconnect battery Ground (GND) strap.
-
Remove as necessary the air guide appropriate to engine version.
-
Disengage tab on yellow connector -3-and disconnect connector.
-
Remove two bolts -2- at crash sensor -1-.
-
Installing
-
Switch ignition on.
WARNING: No person may be inside the vehicle when connecting the battery.
See Cautions for connecting Telematics battery
-
Connect battery Ground (GND) strap.
2
-
Bolts (2x)
-
Tightening torque 9 Nm.
3
-
Connector
4
-
Lock carrier
NOTE: