A4 V6-3.0L (AVK) (2004)
-
Remove bolt -2- (accessible from below)
-
Remove bolts -1- and remove power steering pump -3-.
Installing
Installation is in the reverse order of removal. Observe the following when doing so:
Note
-
Replace seals and gaskets.
-
Before installing new power steering pump on intake side, fill hydraulic oil and turn by hand until oil escapes on pressure side.
-
Secure allhose connections with newhose clamps.
Marking -P- on suction hose -1- must align with formed seam on power steering pump -2- -arrows-.
-
Clean oiled places in engine compartment.
-
Install power steering pump ribbed belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair
-
Install lock carrier. See: Body and Frame/Lock Carrier/Service and Repair