A4 V6-3.0L (AVK) (2004)
-
Loosen bolts of tie rod end and press tie rod end downward and out of way.
-
Unscrew hex bolts -3- and -4-
Note: Always replace nut -4-.
-
Pull out tie rod
-
Loosen bolted joint to release suspension strut from track control link.
Tightening torque: 90 Nm
Note: Use a new nut.
-
Position suspension strut in front of track control link as seen in direction of travel.
-
Unscrew speed nut -arrow-.
-
Pry out clips and remove cover.
-
Disengage cable.
-
Remove plastic cover.
-
On 6-Cyl. engines, remove shield on driver's side.
Tightening torque: 2 Nm