A4 V6-3.0L (AVK) (2004)
Shift Interlock Solenoid: Testing and Inspection
Shift Lock Solenoid -N11O-, checking
Note: This test must be performed if the specified values in the voltage measurement are not reached.
Additional special tools and equipment
-
Connector test kit VAG 1594 A
Test sequence
-
Remove cover for shift control mechanism
-
Disconnect harness connector at Shift lock solenoid -N110 -A-.
-
Attach multimeter for resistance measurement between contacts -B-.
^
Specified value: 22.3 ± 1 ohms
If the specified value is not reached
-
Replace the shift lock solenoid.