A4 V6-3.0L (AVK) (2004)
Shifter A/T: Service and Repair
Shift Mechanism, Removing and Installing
Shift mechanism, removing and installing
Removing
-
Selector lever handle, removing.
-
Open ashtray in center console and remove trim (arrows).
-
Remove air conditioning operating unit:
-
Remove ashtray in center console:
-
Release all 4 clips (arrows) and pull cover -1- with guide upward to remove.
-
Disconnect electrical harness connector on side of guide.
-
Disconnect electrical harness connector on Shift Lock Solenoid -N110-.
-
Disengage locking cable (arrows).
-
Shift selector lever into position"S".
-
Remove front exhaust system with catalytic converter.
-
Remove heat shield for driveshaft from body of the vehicle.