A4 V6-3.0L (AVK) (2004)
Note: The symbols on the adjustment plate indicate the necessary mounts for Automatic Transmission01Vand the arrow points toward front of
vehicle.
-
Roll VAG1 383A engine/transmission hoist with 3282 transmission support under transmission, align adjustment plate parallel to transmission and
support transmission.
-
Secure transmission on 3282 transmission support using bolt -A-.
Note: If 3282 transmission support is not available, transmission can be supported using the VAG 1383A transmission lift and the 135912
universal mount.
Right transmission support
-
Remove bolts -B-.
-
Remove heat shield -C-.
-
Remove right heat shield -D- by removing bolts -A- from transmission.
Left transmission support
-
Remove bolts -B-.
-
Remove heat shield -C-.
Note: The left heat shield is not installed on 4 cylinder gasoline engines.
-
Remove left heat shield -D- by removing bolts -A- from transmission.
Left and right transmission supports
-
Unscrew nuts -A- on subframe.