A4 V6-3.0L (AVK) (2004)
Note:
^
The brake fluid reservoir does not have to be removed.
-
Remove vacuum line to brake servo - 1 -.
-
Remove the two TORX bolts - arrows -.
Note:
^
To simplify the illustration, the brake fluid reservoir has not been included.
^
Brake fluid reservoir must be moved slightly to the side in order to unscrew upper Torx bolt.
-
Remove storage compartment on drivers side.
-
Removing over-center spring.
-
Disconnect brake pedal from brake servo .
-
Disconnect steering column from steering box - arrowA -.
-
Disconnect connectors at clutch pedal switch - 1 -, brake pedal switch - 2 - and at accelerator pedal module - 3 -.
-
If installed, disconnect connector from Clutch Pedal Starter Interlock Switch F194.
-
Remove securing bolt for mounting bracket - arrowB - and remove entire pedal cluster.