A4 V6-3.0L (AVK) (2004)
/Page-2972001.png)
Clutch Slave Cylinder: Service and Repair
[01E] 6 Spd. M/T AWD
Clutch slave cylinder, removing and installing
Removing
-
Unbolt left drive axle -A- from transmission and move clear to one side.
-
Remove heat shield -B- from transmission.
-
Unscrew bolts (arrows) and remove left transmission support -C- together with transmission mounting.
-
Remove bolt (arrow) and take out slave cylinder from the rear.
Note: Do not depress clutch pedal after removing slave cylinder.
