A4 V6-3.0L (AVK) (2004)
--
Guide clutch slave cylinder - 1 - into transmission housing mounting hole without great sideways movement from working direction of plunger -
arrow A -.
-
While doing this, insert into recess - arrow B - of clutch release lever - 3 -.
-
Tighten the clutch slave cylinder - 1 - with a new bolt - 2 -. Tightening specification Þ [ (Item 13) Internal hex bolt, 23 Nm ].
If the sl.
-
Install the selector shaft lever and tighten the nut - arrow -. Tightening specification Þ [ (Item 24) Cap nut, 20 Nm ].
Attach the left drive axle to the flange shaft. Refer to Þ Suspension, Wheels and Steering 40 Removal and Installation.
Vehicles with 6-cylinder engine:
-
Attach the left drive axle heat shield to the tranmission.
-
Reconnect exhaust system and ensure it is not under stress.
Tightening Specifications
Heat shield for drive axle to transmission .................................................................................................................................................................... 23Nm