A4 V6-3.0L (AVK) (2004)
Note: A few drops of ATF will escape after unscrewing flow valve connection.
-
Always replace ATF inspection plug.
-
Close inspection plug -B- before ATF temperature exceeds 45°Cl).
-
Tightening torque: 20 Nm
Note: At an ATF temperature above 45°C too much fluid will escape as it expands when heated. In this case the quantity of fluid in the
transmission is NOT sufficient!
50°C for tropical countries
-
Press 44 button to exit from function "08 Read data block".
-
Select diagnosis function "06 End output".
-
Switch off ignition and disconnect Data Link Connector.
ATF, changing or filling after repairs
Special tools and workshop equipment required