audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module:|381002|Page 8760 > < All Technical Service Bulletins for Control Module:|381002|Page 8758
Page 1
background image

Control Module: All Technical Service Bulletins
A/T - MIL On DTC P0706 Or P1793 In TCM With CVT Trans

37 08 18 

2012154/11 

December 16, 2008. 

Supersedes Technical Service Bulletin Group 37 number 07-11 dated June 22, 2007 for reasons listed below.

Affected Vehicles

37 MIL on, and/or Multitronic Transmission in Emergency Running Mode (DTC P0706, P1793, or P0722 in TCM)

Condition

-

MIL on and/or vehicle in emergency running mode with gear indicator illumination inverted.

-

DTC 17090-P0706 (Transm. Range Sensor Circ. Range/Performance), 18201-P0722 (Output Speed Sensor 2 Circ. No Signal) or DTC
18201-P1793 (Output Speed Sensor 2 Circ. No Signal).

Technical Background

Not applicable.

Production Solution

Not applicable.

Service

It is not necessary to receive an authorization number from the Technical Assistance Center for the repair described in this bulletin.

1. Attach VAS scan tool printouts to the repair order. Warranty requested documents received without VAS scan tool printouts will be denied

payment.

2. If DTC 17090-P0706, 18201-P0722 or 18201-P1793 is stored in the fault memory, replace Transmission Control Module.

Refer to Group 38, Transmission Control Module (TCM) J217 Removing and Installing.

All Technical Service Bulletins for Control Module:|381002|Page 8760 > < All Technical Service Bulletins for Control Module:|381002|Page 8758