A4 V6-3.0L (AVK) (2004)
/Page-3096002.png)
^
With selector scale and Tiptronic gate
^
Removing and installing -Removing Tiptronic switch -F189-,
5. Symbol panel
^
Clipped into cover
6. Printed circuit
^
With integrated Tiptronic switch -F1 89-
^
Switch consists of 3 Hall sensors, which are activated by a magnet on the transverse slide of the roll cover.
^
In the event of malfunctions, check that the magnet is properly secured on the transverse slide of the roll cover -Item 7 replace the cover if
necessary.
^
If tester indicates DTC 18161, first check adjustment of selector lever cable before replacing printed circuit
7. Roll cover
^
With integrated magnet for Tiptronic switch -F189- on transverse slide
8. Guide
^
Guides roll cover
^
Carefully pry apart the two halves
