A4 V6-3.0L (AVK) (2004)
-
Separate exhaust system at clamp -1-
-
Unscrew heat shield for drive shaft from cover of Torsion differential arrows-.
-
Unscrew drive shaft from transmission.
Drive shaft, removing and installing.
-
Re-insert speed nut -arrow- slightly and secure drive shaft to stud with wire.
-
Place drip tray VAG 1306 below cap.
Note: Oil escapes when cap -B- is taken off
-
Remove circlip -A-.
-
Install an M8 bolt into threaded hole of cap.
-
Remove cap by means of bolt.