A4 V6-3.0L (AVK) (2004)
/Page-3134004.png)
-
Detach flange with removal tool VW 391.
-
A - Screw in two hexagon bolts M8 x 30 into the flange.
-
Pull out sealing ring.
Installing
Installation is carried out in the reverse order, note the following:
-
Replace O-ring between drive pinion bearing and flange.
-
Lightly oil O-ring before installing.
-
Pack space between sealing and dust lips half full with sealing grease G 052 128 Al.
-
Lightly oil outer circumference of seal.
