A4 V6-3.0L (AVK) (2004)
-
Pull cutting cord - 4 - toward inside and insert grab handle - 3 - into adhesive bead - 2 - at D-pillar at top.
-
Pull cutting cord - 4 - upward through adhesive bead using pull handle.
-
Remove window from cut-out.
Side window with gloss package
-
Remove C-/D-pillar trim.
-
Apply adhesive tape - 3 - to C-/D-pillar trim as well as side panel to protect paint from damage.
-
Pull off trim molding - 1 - from retaining clips - 2 - toward front.
CAUTION: Roof trim molding must not be bent.
-
Carefully pull roof trim molding - 1 - from below, beginning at C-pillar, out of retaining clips using a plastic wedge.
-
Pry out roof trim molding at D-pillar in the same manner out of retaining clips and pull off downward.
-
Insert cutting cord around the side window as depicted in the illustration.