A4 V6-3.0L (AVK) (2004)
Window Shade: Service and Repair
Retaining Clips For Sun Shade, Removing and Installing
Retaining Clips For Sun Shade, Removing And Installing
Removing
-
Remove bolt - 1 -.
Tightening torque: 1.5 Nm
-
Remove retaining clip - 2 - and backing plate - 3 -.
Installing
Installation is reverse of removal. Observe the following when doing so:
Backing plate - 3 - is used to balance out tolerances and must be reinserted where it was installed by the factory.