A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Front Door Window Regulator: Service and Repair
Window Regulator, Removing and Installing
Window regulator, removing and installing
NOTE: Position of adjusting screws and nuts should be marked before loosening.
Removing
-
Remove door trim.
-
Mark position of screws and nuts.
-
Run window all the way up.
-
Remove window.
-
Remove window regulator motor.
-
Remove bass speaker.
-
Remove rearview mirror.
-
Remove bolts - 1 -, - 3 - and - 4 -.
-
Unclip cables.
-
Tip rear lower linkage - 5 - forward.
-
Tip front upper linkage - 2 - back.
-
Remove window regulator from door.
Installing
Installation is reverse of removal.
-
After installation, perform basic setting.