A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-2218001.png)
Trunk / Liftgate Shock / Support: Removal and Replacement
Gas-filled strut, removing and installing
Removing
NOTE: When removing or installing the gas-filled strut, push back the opened rear lid only slightly so as to avoid damaging components.
-
Lift retaining springs in succession on both ends using screwdriver and remove gas-filled strut - 1 -.
Installing
-
Clip in gas-filled strut at bottom first, then at top.
-
Install with tube end of strut at rear lid.
