A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-2227002.png)
A-pillar trim, removing
-
Remove door seal in A-pillar area and remove A-pillar trim.
-
Remove nut - 6 -.
-
Drill rivet heads off hollow rivets - 2 - and - 7 - and knock rivet shafts through.
-
Remove trim - 1 -.
-
Upper and lower retaining clips - 3 -must move to balance out tolerances.
-
Retaining clip - 5 - is fixed. It is secured to A-pillar with hollow rivets.
4
-
Pop rivet
