A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
8. Puller tab
-
Closure clip is aligned to the convertible top box lid latch.
-
It must align with the latch housing on the inside.
-
In the closed state, the latch bolt must have sufficient clearance in the latch cover aperture.
9. Washer
10. Ball stud
-
21 Nm
Fig. 1 Removing hinge on lid side
-
Unscrew Hex bolts -2- from convertible top box lid -1-.
-
Hinge -3-.
-
Trim cap -4-.
-
Trim cap -5- for Hex bolts
Fig. 2 Removing hinge
NOTE:
-
Unscrew only the two outer Hex bolts -2- when disassembling the convertible top box lid or the hinge.
-
The hinge base plate must not be detached in the process.
-
Hinge -1- removed on lid side.
-
Remove caps from Hex bolts
-
Unscrew Hex bolts -2- and remove hinge.