A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Releasing fastening for backrest inclination adjustment motor.
-
Disconnect connector - 5 -.
-
Pull cover - 3 - and anti-squeak pad - 2 - to one side.
-
Remove bolt - 4 -.
Preparing backrest inclination adjustment motor
-
Using a screwdriver, turn asymmetric section of teeth - 1 - to align with shaft in backrest frame.
Preparing backrest for new motor
-
Use pliers to break off bracket - 2 -.
-
Secure new motor - 1 - with new bracket - 3 -, using rivets at holes - 4 -.