A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-505003.png)
6. Cylinder block
^
Checking cylinder bore
^
Piston and cylinder dimensions
7. Bearing shell
^
With oil drilling for piston pin lubrication
^
Note installed position
^
Do not interchange used bearing shells (mark)
^
Axial clearance, New 0.10...0.35 mm; Wear limit: 0.40 mm
^
Check radial clearance with Plastigage, New: 0.01...0.05 mm; Wear limit: 0.12 mm
^
Do not rotate crankshaft when checking radial clearance
^
To measure radial clearance, tighten nut -1- to 30 Nm but not further
