A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-602004.png)
15. 15 Nm
16. Crankshaft toothed belt sprocket
^
Contact surface between toothed belt sprocket and crankshaft must be free of oil
^
Removing and installing go to Fig. 2
17. 90 Nm + 1/4 turn (90°) further
^
Replace
^
Do not use oil
^
Use counterhold tool 3415 to loosen and tighten
18. 15 Nm
19. 25 Nm
Fig. 1 Installed position of camshaft sprocket
^
Narrow chamfer of camshaft sprocket must face outward (arrows) and marking for TDC No. 1 cylinder must be visible from front.
