A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Remove bolts (arrows) securing coolant pump and remove coolant pump.
Installing
Install in reverse order, paying attention to the following:
-
Moisten new O-ring -3- with coolant.
-
Insert coolant pump into cylinder block and tighten securing bolts -1-.
Tightening torque: 15 Nm
-
Installing toothed belt and adjusting valve timing.
-
Install ribbed belt tensioning element.
Tightening torque: 25 Nm
-
Install ribbed belt.
-
Fill coolant system.