A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Remove bolts (arrows).
-
Disengage Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80- (item 1) at air guide -2- and remove air guide.
-
Disconnect electrical harness connectors at:
1. Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
2. Mass Air Flow (MAF) Sensor -G70-
3. Wastegate Bypass Regulator Valve -N75-
-
Disconnect hoses -4- to... -7-.
-
Disconnect hose to Secondary Air Injection (AIR) pump.
-
Expose electrical cables.
-
Unbolt air filter housing -8- and remove, to do so, disconnect cable to Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80- on
underside of intake air hose.
-
Unbolt bolts which can be reached from the top between front exhaust pipe and catalytic converter.
-
Remove heat shield above right drive axle, to do so, remove bolts (arrows).