A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Air Door Actuator / Motor: Service and Repair
Defroster Flap Motor V107, Removing and Installing
Defroster Flap Motor V107, Removing And Installing
Removing
-
Remove glove compartment.
-
Disconnect connector - A -.
-
Remove bolts - B -.
-
Remove control motor from mount - C -.
-
Remove lever - D - of Defroster Flap Motor V107 from connecting rod - E -.
Installing
NOTE: The control motor lever is color-coded. The lever for the Defroster Flap Motor V107 is dark green.
Reinstall all parts removed in reverse order, paying attention to the following:
-
Lay wiring harness such that it cannot come into contact with moving components (e.g. control motor lever).
-
Check and erase DTC memory; perform basic setting.
NOTE: Operation of the control motor can be checked as follows: Connect the two contacts "5" and "6" in the control motor connector to a 12 V DC
source. The control motor moves as far as the stop in one direction. Interchanging positive and negative reverses direction. Use adapter for this purpose.