A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Discharge Air Temperature Sensor / Switch: Service and Repair
Right Footwell Vent Temperature Sensor G262, Removing and Installing
Right Footwell Vent Temperature Sensor G262, Removing And Installing
-
Remove operating and display module, Climatronic Control Module J255.
-
Reach through opening for operating and display module, Climatronic Control Module J255 and disconnect connector - A-.
-
Give Right Footwell Vent Temperature Sensor G262 -B - approx. 90 degrees turn in direction of arrow.
-
Pull Right Footwell Vent Temperature Sensor G262 out of air conditioner.
NOTE: observe arrangement of connectors to both sensors ( Left Footwell Vent Temperature Sensor G261 and Right Footwell Vent Temperature
Sensor G262 to avoid interchange).