A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Screw shaft piece -1- of VAS 5190 fuel siphoning device on to fuel filler tube of fuel tank.
-
Now slide suction hose as far into fuel tank until the mark applied earlier -arrow- stands on shaft piece.
NOTE: If using a siphoning device without shaft piece, proceed principally in the same manner.
-
In this case, apply a mark (arrow) on hose at length a = 1,800 mm from end of suction hose using insulating tape. The suction hose is inserted
correctly when the marking applied earlier stands opposite the lip of fuel filler tube.
-
If the hose can only be inserted with difficulty, smear it thinly with engine oil. Never use lubricants containing silicon.
-
Drain fuel tank through fuel filler tube as much as possible.
-
Carefully remove siphoning hose.
-
Remove rear seat bench.
-
Remove cover for right connector flange (arrows).