A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Drive Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
Special tools, workshop equipment, testers, measuring instruments and other items required
Mandrel T10060
Removing
Note: Mark direction of the ribbed belt with chalk or felt-tip pen prior to removal. Running a used belt in the opposite direction could destroy it.
When installing the belt, make sure it is properly seated in the pulleys.
-
Swivel tensioning element in direction of arrow to loosen ribbed belt.
-
Lock tensioner using mandrel T10060 (arrow).
-
Remove ribbed belt.
Installing
-
Install in reverse order.
Note:
^
Before installing the ribbed belt, make sure that all mechanical units (generator, air conditioning compressor, power steering pump) are
securely attached.
^
When installing the ribbed belt, make sure that the direction of rotation is correct and that the belt is installed correctly in the pulleys.