A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-441001.png)
Relay Box: Service and Repair
4-Way Relay Carrier In E-Box In Plenum Chamber, Removing and Installing
4-way Relay Carrier In E-box In Plenum Chamber, Removing And Installing
Removing
NOTE: All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Remove rubber seal for plenum chamber cover.
-
Remove plenum chamber cover -1- toward front -arrows-
-
Use a screwdriver to pry off the two caps -3-.
-
Loosen hex nuts -4- by several turns.
-
Loosen wiper arm -2- from wiper shaft by lightly tilting.
-
Remove hex nuts completely and remove wiper arms.
-
Disconnect securing clips -1- and remove cowl panel grill -5-
-
Remove cover for E-box, plenum chamber -arrows-
