A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-340006.png)
Mark on camshaft sprocket and mark on crankshaft must be at TDC cylinder 1 (arrows).
-
Check dimension -a- between tensioning lever and tensioner housing with a gauge -2- (e.g. drill bit).
^
Dimension a = 6 - 10 mm
If dimension -a- is not obtained
CAUTION:
^
The drive belt tensioner is oil-damped and can only be compressed slowly and with evenly applied force.
^
When compressing the tensioner, excessive force can damage the tensioning pulley.
-
Push pulley on counter-clockwise in direction of arrow with a socket head wrench using even but not excessive application of force until tensioner
piston can be locked with locking plate T10008.
