A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-341002.png)
-
Remove upper part of drive belt cover.
Note: Take special note of the installed position of the upper part of the drive belt cover particularly where it meets the center part of the drive belt
cover.
CAUTION: The engine must only be turned in the direction of the engine rotation (clockwise) at the crankshaft.
Note: To turn the engine over use the center bolt on the crankshaft.
-
Bring engine to TDC on cylinder 1 and turn crankshaft in direction of engine rotation using center camshaft drive sprocket bolt on camshaft. Mark
on camshaft sprocket and mark on crankshaft must be at TDC cylinder 1 (arrows).
CAUTION:
^
The drive belt tensioner is oil-damped and can only be compressed slowly and with evenly applied force.
^
When compressing the tensioner, excessive force can damage the tensioning pulley.
-
Push pulley on counter-clockwise in direction of arrow with a socket head wrench using even but not excessive application of force until tensioner
can be locked with locking plate T10008.
Note: The stop tab of the eccentric bolt must not be bent.
