A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1562002.png)
-
Using a screwdriver, pry off retaining bar -arrow-.
-
Disengage connector catches -arrows- and disconnect harness connectors -1- and -2- from Engine Control Module (ECM).
-
If present, unclip Transmission Control Module (TCM) retaining bracket.
-
Release harness connector -arrow- and disconnect it from Transmission Control Module (TCM).
-
If present, cut through cable tie.
-
Pull off connectors -2- at rear of connector strip.
-
Unscrew wire connection -1-.
