A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1582002.png)
-
Using a screwdriver, pry off retaining bracket -arrow-.
-
Set aside Engine Control Module (ECM) with cables connected.
-
Unclip Transmission Control Module (TCM) retaining bar.
-
Set aside Transmission Control Module (TCM) with cables connected.
-
Disengage catches -arrows- and remove auxiliary relay carrier in E-Box toward top.
-
Unclip fuse carrier at 4-way relay carrier.
-
Remove relays, control modules, and then unclip appropriate relay carrier.
NOTE: Check the exact assignment of 4-way relay carrier, E-Box plenum chamber in the current wiring diagram.
Installing
Installation is reverse of removal, paying attention to the following:
NOTE: All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
