A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1583001.png)
Relay Box: Service and Repair
4-Way Relay Carrier, Removing and Installing
4-way Relay Carrier, Removing And Installing
Removing
-
Remove driver's storage compartment:
-
Remove bolts -1- for fuse box -2-.
-
Remove fuse box from center tube for instrument panel.
-
Detach wiring harness on center tube for instrument panel and set aside.
-
Remove relay or control modules from 4-way relay carrier.
-
Mark cables at screw connections -2-, -3- and -5-.
-
Remove cables from screw connections.
-
Remove bolt -1- and nut -4-.
-
Unclip fuse carrier at 4-way relay carrier.
-
Remove relays, control modules, and then unclip respective relay carrier.
NOTE: Check the exact assignment of 4-way relay carrier in the current wiring diagram.
Installing
Installation is reverse of removal, paying attention to the following:
