A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-856001.png)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor G, Removing and Installing
Fuel Level Sensor G, Removing And Installing
Removing
Observe safety precautions
Observe rules for cleanliness
-
Remove fuel delivery unit
-
Disengage electrical connectors -1- and -2- and disconnect them.
-
Pry on retaining tabs -3- and -4- with a screwdriver and pull fuel level sensor G off downward - arrow -.
Instaling
Installation is in reverse order of removal. Note the following:
-
Insert fuel level sensor G into guides on fuel delivery unit and push up until it engages.
-
Connect electrical connections and check that they are securely engaged.
-
Install fuel delivery unit.
