audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Filter, Removing and Installing|Page 3703 > < Fuel System - MIL ON DTC P0300/P030X/Lean Condition|Page 3698
Page 1
background image

Fuel Filter: Service and Repair
Fuel Filter, Removing and Installing

Fuel Filter, Removing And Installing (Vehicles With 1.8L Turbo Engine)

Special tools, testers and auxiliary items required

-

Drip tray

Removing

-

Remove right cover next to fuel tank - arrows -.

-

Place the drip tray under the fuel filter.

CAUTION:  The fuel system is under pressure. Before opening system, place rags around the connection area. Then release pressure by carefully
loosening the connection.

-

Disconnect following fuel lines at fuel filter:

1. Return line
2. Supply line from fuel tank
3. Supply line to engine
4. Ventilation line

-

Remove bolts -5-.

-

Remove fuel filter.

NOTE:  Shown in illustration on a vehicle with all wheel drive. Installation is in reverse order of removal. Note the following:

Fuel Filter, Removing and Installing|Page 3703 > < Fuel System - MIL ON DTC P0300/P030X/Lean Condition|Page 3698