A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Disconnect fuel supply line -1- and ventilation line -2- from connector flange (right side of vehicle) (press release button).
-
Use e.g. 3087 wrench to remove locking ring.
-
Pull connector flange and sealing ring from opening of fuel tank.
-
Disconnect harness connector (arrow) to fuel gauge on the inside of connector flange.
-
Guide fuel pump wrench 3307 in through fuel tank opening and position on Fuel Pump (FP).
-
Rotate Fuel Pump (FP) toward left approx. 15 degrees to stop.