A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-175003.png)
-
Exit function "08 - Read measured value block" by pressing square button.
If indications do not resemble description:
Checking switch
-
Remove driver's storage compartment:
-
Disconnect connector from Clutch Vacuum Vent Valve Switch -F36-.
-
Connect multimeter between terminals 2 and 3 to measure resistance.
Specified value: approx. 0 Ohm
-
Operate clutch pedal.
Specified value: Infinite Ohms(no continuity)
If specified value is not obtained:
