A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Grasp through the gap between connector flange and installation opening in fuel tank and release suction jet pump -1-.
NOTE: Fuel tank is depicted as cut-out section.
-
Pull suction jet pump -1- upward with suction jet pipe -2- still connected.
-
Disconnect suction jet pipe from suction jet pump (press release button).
-
Remove suction jet pump.
-
Remove Fuel Pump (FP).
Installing
Installation is the reverse of removal, noting the following:
-
Connect suction jet pipe -2- to connection for suction jet pump -1-.
-
Insert Fuel Pump (FP) into fuel tank.