A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Release and disconnect harness connector -1-.
-
Disengage electrical harness connector -2- and lay it aside.
CAUTION:
-
Work on the fuel system must only be performed when engine is cold.
-
Fuel system is under pressure. Before opening system, place rags around the connection area. Then release pressure by carefully loosening
connection.
-
Mark and disconnect fuel supply line -1- and fuel return line -3- (press release tab).
-
Disconnect ventilation line -2- (press release button).
-
Use e.g. 3087 wrench to remove locking ring.
-
Lift out fuel pump with sealing ring slightly from opening of fuel tank
-
If Fuel Pump (FP) is still inserted in fuel tank, slide connector flange slightly to the side.