A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-231001.png)
Camshaft Position Sensor: Testing and Inspection
With Generic Scan Tool
Camshaft Position (CMP) Sensor -G40-, Checking
Recommended special tools and equipment
-
V.A.G1526A hand multimeter
-
V.A.G 1527 B Voltage Tester
-
V.A.G1594A connector test kit
-
V.A.G1598/31 test box
Test requirement:
-
Ignition switched off.
Checking activation
-
If installed, slide back rubber grommet from connector for Camshaft Position (CMP) sensor.
-
Connect voltage tester e.g. V.A.G 1527 B with measuring probes and connector adapters from V.A.G 1594 A between socket 2 (CMP sensor
