A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
lock housing -3-.
NOTE: Always observe specifications for replacing induction coil for anti-theft immobilizer if lock cylinder must be replaced.
Installing
Installation is reverse of removal, paying attention to the following:
-
Insert spare key into lock cylinder and turn to position "ignition on'
-
Re-insert steel wire or pin -1- into the hole in front of lock up to stop.
-
Slide lock cylinder -2- with induction coil into steering lock housing -3-. Then pull out wire and press in lock cylinder firmly until catch engages
audibly.
-
Connect electrical harness connector at induction coil for anti-theft immobilizer when installing steering column switch.