A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Alignment: Service and Repair
Overview of Work Sequence For Measuring and Adjusting Wheel Alignment
Note:
^
The vehicle must always be in unladen condition when measuring wheel alignment.
^
Exception: this does not apply when measuring toe-in curve as described in alignment program instructions.
^
Check which suspension version is installed in vehicle. This information is listed on the vehicle data sticker
Always keep to the following sequence:
1 - Check camber at front wheels and center if necessary
2 - Check camber at rear wheels and adjust if necessary.
3 - Check toe setting at rear wheels and adjust if necessary.
4 - Check toe-in curve at front wheels if necessary.
-
The table on and the description on Front axle toe-in curve, adjusting indicate whether or not the toe-in curve (toe-constant "S") requires
adjustment".
5 - Check toe setting at front wheels with suspension in initial position and adjust if necessary.
6 - If settings have been altered at the front wheels, perform zero compensation for steering angle sensor Steering Angle Sensor G85 Vehicle
diagnostic, testing and information system. VAS 5051 A. See: Sensors and Switches - Steering and Suspension/Sensors and Switches -
Steering/Steering Angle Sensor/Adjustments