A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Alignment: Service and Repair
Rear Axle Toe, Adjusting
Rear axle toe, adjusting
-
Remove floor pan panel - 1 - in front of trapezoidal link.
Convertible only
-
Remove diagonal brace - 1 - or - 2 - on the side where toe adjustment is required.
Continued for all vehicles
-
Remove nut - C - on bolt connection between trapezoidal link (inside, front) and subframe.
-
Adjust toe by turning eccentric bolt - D -.
-
Install and tighten new nut - C -.
Note:
^
The maximum adjustment range is 90° to the left or right of the center position.
^
Adjusting the individual toe settings automatically alters the geometric running direction of the axle.
-
Check toe setting again after tightening nut - C -.
Cabriolet models only
-
Install diagonal strut.
Continued for all vehicles
-
Install underbody trim.