A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
/Page-1627002.png)
Installing
Installation is reverse of removal, paying attention to the following:
-
Make sure that all 3 catches as well as the harness connector are engaged cleanly.
-
Connect battery. Required steps.
-
Zero the Steering Angle Sensor -G85-.
Do this using vehicle diagnostic, testing and information system VAS 5051.
Tightening torques
Component
Nm
Trim for steering column switch
1
Steering column switch module (SCSM) 3
