A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Steering Gear: Service and Repair
Power Steering Gear, Overview
Power steering gear, assembly overview
The illustration applies to 4-cylinder, 6-cylinder and 8-cylinder engines
The power steering gear is removed and installed complete with tie rods.
1 - Power steering gear with tie rods
^
Removing and installing (left-hand drive)
2 - Combi bolt, 40 Nm plus an additional 90° 1/4turn
^
Always replace
3 - Bolt, 30 Nm
4 - Steering column
5 - Rubber boot in bulkhead
^
Check for tears and chafing
^
Note correct installation position
6 - Combi bolt, 40 Nm plus an additional 90° 1/4 turn
^
Always replace
7 - Hex bolt
8 - Bolt
9 - Self-locking nut
10 - Hub carrier (steering arm)
11 - Banjo bolt, 47 Nm
12 - Oil seal
^
Always replace
13 - Return hose
14 - Return hose connection, 40 Nm